MY CART
0 Item - $0.00

Saniflo 018 Sanicom 1 Heavy Duty Drain Pump - White

Saniflo 018 Sanicom 1 Heavy Duty Drain Pump - White
Retail Price: $981.75
Our Price: $981.75

Backordered

One or more weeks to deliver. Call or chat to inquire about the availability of this product.

Additional Shipping Charge - Due to size and weight, this item requires an added freight charge of $150.00.

Model: SANFSF018

UPC: 859925002183

Finish: White
018 Saniflo Sanicom 1 Heavy Duty Drain Pump - White

The Sanicom 1 drain pump is used to pump gray water away from a variety of fixtures in commercial and residential applications. The system is able to discharge the waste up to 25 feet vertical and/or 250 feet horizontal. This model was designed to sustain the toughest applications from commercial applications where hot water can be an issue as it is capable of handling up to 194°F.

The Sanicom 1 model was designed to sustain the toughest applications meant for gray water pumps. Its pumping capabilities and unique design are the reason why these range of pumps are preferred for heavy duty applications.

The inside of the Sanicom 1 comprises of a pressure switch and a circuit board assembly, which starts and stops the unit, a powerful 1-HP motor, which in turn starts the motor.

The motor is sealed for life in an oil filled enclosure. A spindle/shaft drives the impeller and therefore the moving parts are kept to an absolute minimum. Water enters the chamber and is pumped away into the sanitary sewer.

The unit pumps the effluent upward to 25 feet and/or 250 feet horizontally (with gravity fall). Once the water is discharged and the water level in the container goes down, the pressure switch deactivates the unit until water enters the unit again. A normal operating cycle for the Sanicom 1 can be as short as 2 - 10 seconds depending upon the discharge pipe run configuration; power consumption is therefore minimal.

  • Dimensions (Height x Width x Depth): 13 in x 17 in x 9 in
  • Weight : 22 lbs.
  • Inlets (in) : 1 1/4'' (top) 2'' (side inlets)
  • Power supply : 120 V - 60 Hz
  • Shower/bathtub base min height : 10" min
  • Noise level (measured at 3 ft.) : ≤ 68 dBA
  • Horizontal discharge : 250 ft
  • Vertical discharge : 25 ft
  • Amperage (Amps) : 10 Max
  • Operating maximum temperature : 194 F°
  • Discharge pipe diameter : 1"
  • Tank volume : 2.75 gallons
  • Method of activation : Pressure switch/circuit board
  • Discharge rate at 3 ft : 33 gal/min (124 liters/min)
  • Discharge rate at 25 ft : 17 gal/min (64 liters/min)
  • Motor Speed (RPM) : 3500
  • Motor : 1 HP oil-filled thermally protected motor
  • Capacitor rating (microfarad) : 45
  • Power cord length (in) : 50
  • Shut off head (ft) : 53
  • Normal running time : 4-6 sec (short bursts)

SANFSF018 Reviews - Submit A Review

Join Our Professional Site for Deeper Discounts with Access to Inventory at 21 Warehouses! Click for More Info