Saniflo 099 Sanicubic 2 VX Heavy Duty Duplex Vortex Pump 1.5 HP

The Sanicubic 2 VX is a 1.5 HP heavy duty duplex Vortex system used to pump away waste water from several bathrooms and fixtures from an entire building structure. This system is able to discharge the waste up to 36 feet vertical using a 2" diameter pipe or up to 20 feet when discharging through a 4" pipe. It incorporates a Vortex system which is ideal for uncontrolled environments in both residential and commercial applications (ie. rental unit, offices, warehouses, etc). The Sanicubic 2 VX is designed to handle sanitary products that may have been flushed down the toilet; such may consist of condoms, sanitary napkins, q-tips, dental floss, etc. as well as large diameter solids.

This system consists of two 1.5-HP motors housed inside a compact but highly durable plastic enclosure. Incorporates a couple of vortex impellers capable of handling up to 2" solids.

The Sanicubic 2 VX operation is as simple as the installation. The effluent enters the pump through one of five different inlets – one on either side of the unit at the bottom and three along the top. The inlets can accommodate 1-1/2” or 4” diameter pipes. As soon as the wastewater level reaches the trigger point, the pumping system activates. The effluent is then pumped out through 2” or 4" diameter rigid pipe connected on the top of the pump.

The inside of the Sanicubic 2 VX comprises of a couple of pressure switches and a circuit board assembly, which starts and stops the unit, and of a couple of motors, which drive the Vortex impellers and the pump. The motors are sealed for life in an oil filled enclosure. A common spindle/shaft drives each of the impellers. The moving parts therefore are kept to an absolute minimum.

• Dimensions (Height x Width x Depth): 29-5/8" x 36" x 28"
• Weight : 223 lbs.
• Inlets (in) : 1 1/2'' (side) 4" (top)
• Power supply : 240 V - 60 Hz
• Horizontal discharge : 328 ft
• Vertical discharge : 36 ft (2") or 20 ft (4")
• Operating maximum temperature : 158 F°
• Discharge pipe diameter : 2" or 4"
• Tank volume : 31.7 gallons
• Method of activation : Pressure switch/circuit board
• Discharge rate at 3 ft : 125 gal/min (473 liters/min) (2") or 137 GPM (518 liters/min) (4'')
• Discharge rate at 36 ft : 26 gal/min (98 liters/min) (2") or 90 GPM (340 liters/min) (4'')
• Motor : 1 HP oil-filled thermally protected motor
• Capacitor rating (microfarad) : 2 x 30
• Power cord length (in) : 98
• Shut off head (ft) : 43
• Normal running time : Depends on number of fixtures
• Toilet, Shower/bathtub base min height (in) : 12